DIRECTIONS:
1. Clean and dry parts using Permatex Surface Prep® activator.
2. Shake bottle well before each use.
3. Remove cap and snip nozzle tip.
4. Apply Threadlocker to threaded areas and assemble parts. Refer to Technical Data Sheet for complete information.
NOTE: Threadlocker works on metal parts. It is not recommended for plastics. Cured Threadlocker must be heated to 260° to 316°C (500° to 600°F) before parts will separate.
Permatex High-Temperature, High-Strength Threadlocker Red is ideal for heavy-duty applications 3/8″ to 1″ (10mm to 25mm) Red threadlocker is well-suited for permanently locking studs and press fits. Threadlocker RED adds 3,000 PSI holding power on slip and press fit assemblies, and replaces set screws and snap rings. Permatex’s Threadlocker Red locks against vibration loosening. May require heat or special tools for removal. This high-temperature formulation is designed for high performance applications that require extreme temperature resistance. Suited for temperatures up to 232°C (450°F).
1High temperature, high strength threadlocker for heavy-duty applications
2Prevents bolts and press fits 3/8" to 1 1/2" (10mm to 38mm) from loosening due to shock, severe vibration and heat stress
3Exclusive formulation for newer engines and high performance applications
4Suited for temperatures up to 232°C (450°F )
5Removable with heat and hand tools
