AVAILABLE AT:
TO MAKE A GASKET:
1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
2. Spray Permatex Surface Prep® activator on one surface only. Allow to dry 1-2 minutes.
3. Apply a continuous bead of sealant to the unprimed surface.
4. Assemble mating surfaces with minimal lateral movement. Excess sealant can be wiped away with a cloth and shop solvent.
TO DRESS A GASKET:
1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
2. Spray Permatex Surface Prep® activator to both flange surfaces. Allow to dry 1-2 minutes.
3. Completely cover both sides of the precut gasket with sealant.
4. Place coated gasket on flange, and assemble mating surfaces with minimal lateral movement.
Permatex Anaerobic Gasket Maker is a noncorrosive gasketing material designed primarily for use on aluminum, iron, and steel flanged mating surfaces. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable. Fills gaps up to .015″ and cures to a solvent-resistant seal that will not tear or decay during service. Parts disassemble easily even after extended service.
