Permatex® Water Pump & Thermostat RTV Silicone Gasket Maker, 14g

DIRECTIONS:

1. Surfaces should be clean and dry.
2. Apply an even, continuous 1/8″ bead of silicone to one surface, surrounding all bolt holes. Remove excess at once with knife.
3. Assemble parts immediately. Do not squeeze out silicone by overtightening bolts. Silicone fully cures in 24 hours. Replace
   cap after use. Clean hands with dry cloth or Fast Orange hand cleaner. Clean tools with non-flammable cleaning fluid.

Note: Not recommended for use on head gaskets or parts in contact with gasoline.

The Permatex RTV Silicone that I am using is too thick to fill the gap in my application; can I add acetone to the silicone to make the product thinner?

Permatex does not suggest adding any solvents, chemicals or fillers to any of our products that will change their formulas, characteristics or the way that the product was designed to perform. Permatex offers many other products that may work for your application.