AVAILABLE AT:
TO MAKE A GASKET:
1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
2. Spray Permatex Surface Prep® activator on one surface only. Allow to dry 1-2 minutes.
3. Apply a continuous bead of sealant to the unprimed surface.
4. Assemble mating surfaces with minimal lateral movement. Excess sealant can be wiped away with a cloth.
TO DRESS A GASKET:
1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
2. Spray Permatex Surface Prep® activator onto both flange surfaces. Allow to dry 1-2 minutes.
3. Completely cover both sides of the pre-cut gasket with sealant.
4.Place coated gasket on flange and assemble mating surfaces with minimal lateral movement.
Permatex Anaerobic Flange Sealant is a flexible gasketing material for use on rigid machined flanges with less than .015″ gap. This OEM approved Anaerobic Flange Sealant can be used where OE’s specify “anaerobic gasket (cures in the absence of air). Permatex Anaerobic Flange Sealant eliminates the need for preformed, paper, rubber and cork gaskets and flexes with flanges that move in service.
